Skip to content
Artisan Repair — independent KitchenAid appliance repair
Same-day and next-day appointments in most areas.
Specialized KitchenAid repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
(844) 919-2035
Error Code

KitchenAid Dishwasher F8E0 Error Code

F8E0 on a KitchenAid dishwasher is commonly linked to flow / owi. Below: typical meaning, symptoms, safe checks, and when to book Artisan Repair.

Book a Repair (844) 919-2035

Reviewed by Marcus Hale · Last reviewed August 11, 2026

Marcus Hale Written by Marcus Hale Appliance Repair Content Specialist Published August 9, 2026 Updated August 11, 2026 Technically reviewed August 11, 2026
Verified Wording follows a cited KitchenAid use & care manual Error Handling entry.

Plain-language KitchenAid summary for Artisan Repair visitors; confirm on your model’s documentation.

Error code F8E0
Appliance Dishwasher
Affected model series KitchenAid refrigerators, laundry, cooking, and dishwashing controls that show service codes
Quick answer

F8E0 — Flow / OWI on a KitchenAid dishwasher (confirm for your model).

Model compatibility: KitchenAid reuses codes across series and model years, so F8E0 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

Flow or soil-sensor related family fault. Exact KitchenAid fault text shifts by model and control generation — always confirm against your use & care guide or tech sheet.

Signs

Symptoms you may notice

  • The dishwasher shows F8E0 and over- or under-fills
  • The cycle stalls with F8E0 displayed
  • Water levels seem wrong when F8E0 appears
Why it happens

Possible causes

  • A pressure switch or level sensor
  • A blocked pressure hose or chamber
  • A control interpreting levels as a fault
Before you call

Safe checks you can make

These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.

  • Check the accessible filter for blockages
  • Confirm drainage access is clear
  • Perform a manufacturer-approved restart
  • Record the full KitchenAid model and serial numbers before contacting a technician

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Please avoid

What not to attempt

  • Do not open internal panels or access high-voltage components
  • Do not bypass door locks, safety switches or interlocks
Get help

When to call a technician

For recurring F8E0, independent service is safer than guessing parts. Artisan Repair will diagnose on site and estimate before any repair.

Seeing this code on your KitchenAid appliance?

Book a Repair Or call (844) 919-2035

Book a specialist visit for a clear estimate and approval before any repair. Independent service — not an official KitchenAid service center.

Where it points

Likely related component

pressure switch / level sensor

FAQ

Frequently asked questions

References

Sources & references

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Address We operate in Florida, New York, Texas, and California.
Phone (844) 919-2035
Email info@kitchenaidservicecenter.support
Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.

Request your repair

Fields marked with * are required.

Call Book a Repair