KitchenAid Dishwasher FAE4 / F10E4 Code: Diverter Valve Error
FAE4 and F10E4 are the same KitchenAid entry: a diverter valve error, cleared first by cycling power.
Model compatibility: KitchenAid reuses codes across series and model years, so FAE4 / F10E4 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Diverter valve error; the listed step is to cycle power.
An article called “FAE4 or F10E4” on KitchenAid’s help site covers this code under both spellings. Each names the same potential cause, a diverter valve error, and the whole list of troubleshooting is two words: cycle power.
At a glance
| Code | FAE4 / F10E4 |
|---|---|
| What it means | FAE4 and F10E4 are two spellings of a diverter valve error on the dishwasher. |
| What you can check | Pull the dishwasher plug for 30 seconds, or switch its breaker off for 30 seconds if hard wired, then restore power. This is the only step an owner has for FAE4 or F10E4. |
| When to call a technician | When the code shows again after the power cycle, arrange a service visit and mention that the reset was done. |
The two spellings
Nothing in the article accounts for the difference. FAE4 or F10E4 on the display, this entry applies.
Power cycle steps
- KitchenAid compares resetting the control to restarting a computer; the unit has to be disconnected for 30 seconds.
- With a plug, pull it, count 30 seconds and push it back.
- If it is hard wired, find the home electrical panel breaker for the dishwasher, turn it off, wait 30 seconds and turn it on.
What a diverter valve is for
Here is a general explanation, outside the article: a diverter sends wash water to a single spray path at any given time, and an error with the valve means the control has an issue with that part. The owner help does not cover how the valve is tested or replaced, and offers no step after the reset.
When the code returns
Nothing further is listed for owners. Seeing the code a second time after the power cycle is the moment to arrange service, and the call should mention that the reset was done.
Further diverter entries
- F10E5 (FAE5) is a diverter leak and asks for a look under the machine.
- F9E3 is a diverter disk missing.
- F9E1 carries a service listing for the diverter finding its position.
Diverter valve repair for KitchenAid dishwashers in metro areas
In the Miami, New York, Houston, Los Angeles and San Diego metro areas, ring (844) 919-2035 if FAE4 or F10E4 returns after the reset. Our dishwasher repair page is there for background.
Source: KitchenAid Product Help, Dishwasher Error Code or Flashing Lights
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.