KitchenAid Dishwasher F1E2 Error Code
If your KitchenAid dishwasher shows F1E2, start with the safe checks here — the code often tracks control memory / configuration before any parts talk.
KitchenAid homeowner guide language only — not a factory service procedure.
Decode F1E2 for KitchenAid dishwasher owners: Control memory / configuration.
Model compatibility: KitchenAid reuses codes across series and model years, so F1E2 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
The control reported a memory or configuration fault. One power reset is reasonable; recurring F1E2 needs authorized service. Control generations differ across KitchenAid lines — photograph the full code and rating label before ordering parts.
Symptoms you may notice
- The dishwasher shows F1E2 and controls act erratically
- F1E2 appears at power-on
- Programs won’t start reliably with F1E2
Possible causes
- A control-board fault
- A power or wiring irregularity
- A firmware or electronics glitch
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
- Confirm stable power at the outlet
- Perform a manufacturer-approved restart once
- Record the full model number
- Write down when F1E2 appeared and which cycle or mode was running
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
What not to attempt
- Do not open internal panels or access high-voltage components
- Do not bypass door locks, safety switches or interlocks
When to call a technician
Persistent F1E2 after one careful reset is a technician visit. Artisan Repair serves KitchenAid appliances as an independent repair shop.
Likely related component
control board
Frequently asked questions
The control reported a memory or configuration fault. One power reset is reasonable; recurring F1E2 needs authorized service.
Safe homeowner resets may clear F1E2 temporarily; sealed, gas, and live-board work stay with a technician.
Platform families overlap, but Artisan Repair still confirms F1E2 against your serial family.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.