F8E5 points to a fill valve stuck open. KitchenAid's listed steps stop the water and handle the alarm.
Model compatibility: KitchenAid reuses codes across series and model years, so F8E5 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Fill valve stuck open; stop the water, press Cancel once, keep the door shut, and cut power only when the water cannot be shut off.
A KitchenAid dishwasher showing F8E5 has a fill valve stuck open as its potential cause, and KitchenAid lists the response as a fixed sequence.
At a glance
| Code | F8E5 |
|---|---|
| What it means | The fill valve is stuck open, letting water keep entering the dishwasher. |
| What you can check | Turn off the water supply to the dishwasher if you can, press Cancel once to silence the alarm, and keep the door closed. Switch off power only if the water cannot be shut off. |
| When to call a technician | Have the dishwasher serviced before you run it again. If water has spread across the floor or around the base, stay away from electrical connections and do not stand in it. |
Sequence
- Water to the dishwasher goes off first, when you can manage it.
- A single press of Cancel silences the alarm tone. Then close the door.
- Do not switch the power off; the door stays closed.
- If the water supply won’t turn off, then and only then turn the power to the dishwasher off.
The logic: power remains on while water can be stopped, and is removed when it cannot. The reason behind this is not given.
Not covered
KitchenAid lists no reset or power cycle for F8E5, nothing about locating or using the shut-off valve, and no steps after the shut-off. Calling for service is the sensible follow-up.
Staying safe
Should water have spread across the floor or appear around the base, keep away from the electrical connections and do not stand in it while working on the machine. Dry up the spill and get the dishwasher serviced before running it again.
Related water entries
- F8E4: water in the drip tray or loose connections, and a drain sequence on professionally installed units
- F10E5 (FAE5): diverter leak
- F6E2: electrical circuit of the fill valve
Fill valve repair for KitchenAid dishwashers in metro areas
In the Miami, New York, Houston, Los Angeles and San Diego metro areas, (844) 919-2035 is our line for a KitchenAid dishwasher with F8E5 after the water is off. Report the code, the model and any power cut. Visit the dishwasher repair page as well.
Source: KitchenAid Product Help, Dishwasher Error Code or Flashing Lights
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.