KitchenAid Oven F2E0 Error Code
F2E0 indicates a keypad button — commonly Cancel/Off — is shorted or stuck pressed.
F2E0 decoded as a shorted/stuck keypad circuit on KitchenAid Whirlpool-family EOCs.
F2E0 indicates a keypad button — commonly Cancel/Off — is shorted or stuck pressed.
Model compatibility: KitchenAid reuses codes across series and model years, so F2E0 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
F2E0 indicates a specific keypad button, commonly the Cancel/Off key, is shorted or stuck in the pressed position. The control locks out heating to protect itself until the stuck circuit clears. KitchenAid ovens and ranges use Whirlpool-family electronic oven controls (EOC) across several generations; the exact fault behind a given F#E# pair can vary slightly by model and control generation. Record your model and serial numbers and confirm against your appliance documentation.
Symptoms you may notice
- F2E0 on the display
- The keypad appears unresponsive
- The oven may shut off heating as a precaution
Possible causes
- Moisture, grease or food residue trapped under the touchpad
- A failed keypad membrane
- A control board misreading the keypad input
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
- Wipe the control panel dry and free of residue with an approved cleaner
- Confirm nothing is resting on or pressing the panel
- One breaker power cycle for two minutes
Important safety warning. Do not open internal panels, access high-voltage wiring, or bypass any safety device. If you ever smell gas, stop immediately, do not operate any switches, leave the area and contact your gas provider and a qualified technician. If you see smoke, sparks, a burning smell, or water near electrical parts, switch the appliance off at the outlet if it is safe to do so and call a professional.
What not to attempt
- Do not open internal panels or access high-voltage components
- Do not bypass door locks, safety switches or interlocks
- Do not adjust, disconnect or repair any gas connection or valve
Likely related component
Keypad / touch control membrane
Frequently asked questions
If the code clears after cleaning the panel and a power cycle, normal use can resume. If it returns immediately, the keypad or control board likely needs replacement.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.