1C1C and 1C2C share one KitchenAid entry for wall ovens. The cause may be the keypad or its wiring; a one-minute breaker reset is listed.
Model compatibility: KitchenAid reuses codes across series and model years, so 1C1C / 1C2C may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
A possible problem with the keypad (user interface) of a wall oven or its wiring.
If a KitchenAid wall oven displays 1C1C or 1C2C, the manufacturer’s help says the cause may lie with the user interface/keypad or the wiring connected to it. Both codes are explained in identical words.
At a glance
| Code | 1C1C / 1C2C |
|---|---|
| What it means | Possible problem with the keypad or user interface of a wall oven, or its wiring. |
| What you can check | At the breaker panel, turn the oven's circuit off for sixty seconds, then back on. Keep an eye on the display for a minute, then try the oven to verify it operates. |
| When to call a technician | A returning code is a job for a technician, who can look at the control panel and wiring. Tell them you already tried the breaker. |
Frequently asked
What is the user interface? The control panel used to set the oven. Because the code names it, the panel or its link is the area of concern, rather than a part that heats or a part on the door. KitchenAid writes “may”, so treat the code as a pointer, not a verdict on the keypad.
Can I clear it with a button sequence? None is listed. KitchenAid’s reset runs through the circuit breaker.
Do the two codes differ? The text does not separate them.
Will the oven still cook? The article does not say.
The reset
- At the breaker panel, turn the oven’s circuit off.
- Allow sixty seconds.
- Turn the circuit on.
- Keep an eye on the display for a minute and check that the code stays away.
- Try the oven and verify it operates.
Code still showing
KitchenAid goes no further than the reset. A returning code is a job for a technician, who can look at the control panel and wiring. Instructions for opening the oven, testing the keypad or following wires do not appear in the article.
Similar entries
- F2E0 group: also keypad, control or wiring
- F1E0: touchpad interface, control or wiring
Oven repair for metro-area customers
Homes in the Miami, New York, Houston, Los Angeles and San Diego metro areas can book a visit through (844) 919-2035. Tell the dispatcher the code, the oven model and that you have already tried the breaker. Our oven repair page lists more.
Source: KitchenAid Product Help, Wall Oven: Error Code or Message
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.