F6E5 refers to the control panel assembly or wiring. KitchenAid lists a power reset; a repeat calls for service.
Model compatibility: KitchenAid reuses codes across series and model years, so F6E5 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Possible problem with the Control Panel Assembly or its wiring.
Seeing F6E5 means KitchenAid suspects the front of the oven: the control panel assembly, along with the wiring tied to it.
At a glance
| Code | F6E5 |
|---|---|
| What it means | Possible problem with the Control Panel Assembly or its wiring. |
| What you can check | Turn the oven's supply breaker off, and after sixty seconds turn it on. For a minute afterwards look out for F6E5, then use the oven's ordinary functions. Do not mash the keys. |
| When to call a technician | Arrange service if F6E5 returns, so the panel and wiring are tested properly. Do not work trim loose, because the assembly carries wiring to other electronics. |
Panel assembly, simply put
This is what you operate (the buttons, touch spots or dials) combined with the circuits behind them. Because the whole assembly is named, there is no word on what inside is faulty, and nothing about how touch behaves once the code is shown.
Reset
Turn the oven’s supply breaker off. After sixty seconds turn it on. For a minute afterwards look out for F6E5, and then use the oven’s ordinary functions. The article gives no other owner step than this reset.
Please don’t
Do not mash the keys or work trim loose. KitchenAid recommends neither one. The assembly carries wiring to other electronics in the oven.
Similar codes compared
| Code | Named by KitchenAid |
|---|---|
| F6E5 | The panel assembly as a whole |
| F6EA | Over-temperature sensed by the user interface control |
| F1E0 | Touchpad (user interface), its control, or wiring |
Stuck key?
Keys do not feature in the F6E5 article. Some other KitchenAid cooking appliances do have a stuck-button message, though it carries a different code.
Should it return
Arrange service, so that the panel and wiring are tested properly.
Control panel service in the metro areas we cover
Our calls come from the Miami, New York, Houston, Los Angeles and San Diego metro areas. Phone (844) 919-2035 and describe the display and key behaviour; the oven repair page lists other useful details.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.