F06 on a KitchenAid range points to the electronic control or its wiring and lists a one-minute breaker reset.
Model compatibility: KitchenAid reuses codes across series and model years, so F06 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Possible problem with the electronic control or the wiring that goes with it.
Among KitchenAid’s range codes, F06 has one of the briefest definitions: a possible fault in the electronic control or in the wiring around it, with no mention of a sensor, a door or an element.
At a glance
| Code | F06 |
|---|---|
| What it means | Possible problem with the electronic control or the wiring that goes with it. |
| What you can check | Switch the range off at its breaker for 60 seconds, switch it on, and check for the code over the next minute. Make sure the oven runs. |
| When to call a technician | If F06 survives the reset, schedule a service visit. The electronic control is electronics that run the oven and is not something to repair at home. |
What the manufacturer provides
| Topic | Entry |
|---|---|
| Part | Electronic control |
| Secondary | Associated wiring |
| What you can do | Reset power at the breaker |
| Stated cause | None |
Reset in order
- Switch the range off at its breaker for 60 seconds.
- Switch it on again.
- Check for F06 over the next minute.
- Make sure the oven runs.
The wall oven page gives the same instruction for F06, so built-in ovens use the same steps.
When F06 survives the reset
There is nothing else to try from the published material. A returning code is a service call, because the electronic control is the electronics that run the oven and not something to repair at home.
Short answers
- Sensor related? Not by KitchenAid’s wording. Sensor entries look like F3 and F1-1.
- Finding the model number? The pages do not locate the label. The owner’s manual or range paperwork should.
Related codes
- F03 / F04: the electronic oven control, a close match.
- F0E0: the control cannot name the problem type.
Range service in the metro areas we cover
Customers in the Miami, New York, Houston, Los Angeles and San Diego metro areas can reach us at (844) 919-2035 when F06 returns. Mention the breaker reset and keep the range model number ready.
Source: KitchenAid Product Help, Ranges: Error Codes; KitchenAid Product Help, Wall Oven: Error Code or Message
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.