F1E1: reset steps and no stated cause on commercial-style range pages, an oven control entry on the range page.
Model compatibility: KitchenAid reuses codes across series and model years, so F1E1 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
No cause is stated on commercial-style range pages, which list resets; the range page names the oven control or its wiring.
Two levels of detail
For F1E1, KitchenAid gives a short answer in two versions. The commercial-style range pages hold resets and no explanation. The regular range page is more concrete, pointing at the oven control or the wiring.
At a glance
| Code | F1E1 |
|---|---|
| What it means | A possible problem with the oven control or its wiring. |
| What you can check | Set the temperature knob to OFF to cancel the error. If it shows again, remove power for five minutes, or use the 60-second breaker reset, and verify the range works normally. |
| When to call a technician | If F1E1 keeps repeating after the resets, call for a technician. No cleaning, adjustment or part swap is described for owners. |
Published sequence
- Set the temperature knob to OFF. KitchenAid says that cancels the error so you can keep using the range.
- If the code shows again, take power away from the range for five minutes. Unplug it if it has a plug, otherwise use the breaker, then power it back.
- The quicker alternative on the pages: breaker off for 60 seconds, back on, start the cycle, and monitor the display for a minute.
- Verify the range works normally.
What the oven control is
Background, not source detail: it is the electronics that run cooking functions. KitchenAid naming it for a code means the control could be reporting trouble in itself or in its connections.
If the resets fail
With nothing after the resets on the commercial-style pages, a repeating code is a technician matter. No cleaning, adjustment or part swap is described for F1E1.
Short answers
- Which step first? The knob, then the power resets.
- What failed? Commercial-style pages do not say; the range page names the control or its wiring.
Related codes
- F1E0: shares the reset instructions, plus a tech-sheet note.
- F2E2: reset-only commercial-style entry, keypad on the range page.
Range service across our metro areas
Call (844) 919-2035 when F1E1 persists. We take KitchenAid range calls in the Miami, New York, Houston, Los Angeles and San Diego metro areas, so keep the model number and the reset you tried at hand.
Source: KitchenAid Product Help, Commercial-Style Range: Error Codes; KitchenAid Product Help, Ranges: Error Codes
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.