KitchenAid Range Codes FCE1, FCE2 and FCE3: Cannot Reach Router
FCE1, FCE2 and FCE3 share KitchenAid wording: the range could not connect to the router.
Model compatibility: KitchenAid reuses codes across series and model years, so FCE1 / FCE2 / FCE3 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
For FCE1, FCE2 and FCE3 KitchenAid says the appliance could not connect to the router, from a time-out, weak signal, a failed router, the Wi-Fi module or wiring.
These are connectivity messages
The FCE family covers connected-appliance behaviour, not baking or broiling. For FCE1, FCE2 and FCE3 KitchenAid gives one explanation: the appliance could not connect to the router. It names five possible reasons: connection time-out, poor signal strength, a failed router, the appliance’s Wi-Fi module, and the wiring that goes with it.
At a glance
| Code | FCE1 / FCE2 / FCE3 |
|---|---|
| What it means | The range could not connect to the router, possibly from a time-out, weak signal, a failed router, the Wi-Fi module or wiring. |
| What you can check | Reset your wireless router and test another Wi-Fi device near the range. Unplug the router for two minutes, reconnect it, then keep the range off power for two minutes. For weak signal, move the router or add an extender. |
| When to call a technician | If the code survives a working router and a good signal, a technician should test the Wi-Fi module and wiring. |
What to try, step by step
- Start by resetting the wireless router.
- Ask yourself if another Wi-Fi device at home runs properly.
- Then ask the same of a smartphone or tablet, carrying it near the range to find out.
- When they run properly, pull the router plug for two minutes and reconnect it, followed by two minutes without power for the appliance.
When the signal is poor
If the range is not getting full signal bars, KitchenAid offers three paths. Relocate the router in your home, obtain a compatible signal extender, or get in touch with your internet service provider.
The appliance power reset
There is a breaker variant as well. Turn the breaker off for one minute, restore it, watch the range for a minute, and verify operation.
Beyond the owner steps
Since the Wi-Fi module and wiring are among the listed causes, a code that survives a working router and a good signal calls for a technician’s test of those parts.
Neighbouring codes
| Code | Meaning in short |
|---|---|
| FCE7 | No link between module and internet |
| FCE4 / FCE5 | Wi-Fi antenna or its wiring |
| FCE6 / FCE9 | Wi-Fi power module or its wiring |
KitchenAid range service for Wi-Fi faults
Customers in the Miami, New York, Houston, Los Angeles and San Diego metro areas can call (844) 919-2035. Tell us the code, the model number and what you reset on the router and the range.
Source: KitchenAid Product Help, Ranges: Error Codes; KitchenAid Product Help, Wall Oven: Error Code or Message
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.