A KitchenAid range showing FCE4 or FCE5: the Wi-Fi antenna or its wiring may be at fault.
Model compatibility: KitchenAid reuses codes across series and model years, so FCE4 / FCE5 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
KitchenAid says FCE4 and FCE5 each point to a possible problem with the Wi-Fi antenna or the associated wiring.
What the entry actually states
FCE4 and FCE5 are one KitchenAid entry listed under two numbers: a possible problem with the Wi-Fi Antenna, or the associated wiring. That puts the issue in the appliance, which is a departure from FCE1 through FCE3, where the router is the first suspect.
At a glance
| Code | FCE4 / FCE5 |
|---|---|
| What it means | Possible problem with the Wi-Fi antenna or its wiring. |
| What you can check | Switch the breaker off for one minute, then on. Monitor the range for a minute to see that the code does not return, and verify it operates. |
| When to call a technician | If FCE4 or FCE5 returns after the breaker reset, the fault is in hardware that a technician has to test. Router checks will not help here. |
Power reset
The Ranges help, under “Reset power to the product”, is short.
- Breaker off, one minute.
- Breaker on.
- Monitor for a minute to see that the code does not display again.
- Verify appliance operation.
The wall oven article repeats this. At the end, the entry points to the KitchenAid line for connected-appliance questions.
Why the router is not involved
If the cause is an antenna or its wiring, resetting the router does nothing for it, and none of the router checks from the FCE1 to FCE3 entries appear here.
Difference between the two codes
The text matches word for word, and no explanation of the difference is given.
Next step
If the code returns after the breaker reset, the problem is in hardware that a technician has to test.
More on Wi-Fi codes
- FCE1 / FCE2 / FCE3: the range could not connect to the router.
- FCE6 / FCE9: Wi-Fi power module or wiring.
- FCE7: no link from module to internet.
KitchenAid range repair, five metro areas
Within the Miami, New York, Houston, Los Angeles and San Diego metro areas, dial (844) 919-2035. State whether the screen shows FCE4 or FCE5.
Source: KitchenAid Product Help, Ranges: Error Codes; KitchenAid Product Help, Wall Oven: Error Code or Message
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.