A range showing FCE6 or FCE9: the Wi-Fi power module or its wiring is the named suspect.
Model compatibility: KitchenAid reuses codes across series and model years, so FCE6 / FCE9 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
KitchenAid says FCE6 and FCE9 may each be a problem with the Wi-Fi power module or its associated wiring.
One sentence of diagnosis
For FCE6 and for FCE9, KitchenAid says only this: a possible problem with the Wi-Fi Power Module or the associated wiring. The entries are the same, and that is the extent of the published diagnosis.
At a glance
| Code | FCE6 / FCE9 |
|---|---|
| What it means | Possible problem with the Wi-Fi power module or its wiring. |
| What you can check | Cut power at the circuit breaker for a minute. Switch it back on, watch the appliance for a minute to see if the code is gone, and verify that it operates. |
| When to call a technician | If FCE6 or FCE9 returns after the reset, book a service visit. Leave the range closed rather than hunting for the module or its wiring. |
The module in general terms
A power module serving a Wi-Fi feature generally supplies what the wireless hardware requires. KitchenAid does not elaborate, and its pages do not mention a mounting location.
Owner steps
Cut power with the circuit breaker for a minute. Switch it back on and watch the appliance for a minute to see whether the code is gone. Finally, verify that it operates. The Ranges page contains this and nothing more for owners, and the wall oven page repeats it.
Things you will not find
- Any advice on the router, which FCE1 to FCE3 do offer.
- Tips for improving signal strength.
- Talk of registration or a SAID number; those belong to FCE8.
When it returns
A returning code with the power module and wiring under suspicion points to a service visit. Leave the range closed rather than hunting for either part.
Short answers
FCE6 or FCE9, which is correct?
The one on your display, because KitchenAid treats them identically.
Does this blame my Wi-Fi network?
No. The entry names a component of the appliance and its wiring.
Compare
| Code | Subject |
|---|---|
| FCE4 / FCE5 | Wi-Fi antenna or wiring |
| FCE1 / FCE2 / FCE3 | No connection to the router |
KitchenAid range service in our metro areas
If the breaker reset leaves FCE6 or FCE9 in place, call (844) 919-2035 from the Miami, New York, Houston, Los Angeles or San Diego metro area and tell us which code you see.
Source: KitchenAid Product Help, Ranges: Error Codes; KitchenAid Product Help, Wall Oven: Error Code or Message
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.