KitchenAid ties F2E0 to the keypad or user interface, the control and the wiring.
Model compatibility: KitchenAid reuses codes across series and model years, so F2E0 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Possible problem with the user interface or keypad, the control or its wiring; the technician sheet says keypad disconnected.
On KitchenAid ranges, the control panel is the subject whenever the code begins with F2, and F2E0 follows that pattern. The range support page and the wall oven page both name the user interface or keypad, the control, and the connecting wiring as possible trouble spots.
At a glance
| Code | F2E0 |
|---|---|
| What it means | Possible problem with the keypad or user interface, the control or its wiring. |
| What you can check | Turn the range breaker off for sixty seconds, then on. Look at the display for a minute in case F2E0 reappears, and check that the oven runs. |
| When to call a technician | A code that stays after the reset points to the keypad, control or connections, which a technician has to test. Mention any odd key behavior when you book. |
Wording by source
| Where | Entry |
|---|---|
| Range and wall oven pages | User interface or keypad, control, or wiring may have a problem |
| Technician sheet | Keypad disconnected |
A loose connection is never named as the cause, which makes the sheet line a side note only.
Reset steps from KitchenAid
Switch off the breaker for sixty seconds. Switch it on. Look at the display for a minute in case F2E0 is back, then check that the oven runs.
Code still there
Anything involving the keypad or its connections is for service. If keys act strangely, say so when you book.
More keypad and panel codes
- F2E3, F2E4, F2E5, F2E6: four numbers, one description.
- F2E2: a cancel key entry on the sheet.
- F2E1: a stuck or held-down button.
F2E0 answers
Does the keypad have physical damage?
Not stated. The sheet says disconnected; the support pages say keypad, control and wiring.
Do wall ovens show F2E0 as well?
They do, with the same text on KitchenAid’s wall oven page.
Where we service KitchenAid ranges with an F2E0
Our range repair work spans the Miami, New York, Houston, Los Angeles and San Diego metro areas. Phone (844) 919-2035, and give the model plus the result of the breaker reset. The range repair page describes the service.
Source: KitchenAid Product Help, Ranges: Error Codes; KitchenAid Product Help, Wall Oven: Error Code or Message; KitchenAid Tech Sheet W11393917 Rev B
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.