KitchenAid gives F2E3, F2E4, F2E5 and F2E6 a single entry about the keypad, control and wiring.
Model compatibility: KitchenAid reuses codes across series and model years, so F2E3 / F2E4 / F2E5 / F2E6 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Possible problem with the user interface or keypad, the control or its wiring.
Appearing side by side in KitchenAid’s help pages, F2E3, F2E4, F2E5 and F2E6 carry one shared description. The same group is on the wall oven page.
At a glance
| Code | F2E3 / F2E4 / F2E5 / F2E6 |
|---|---|
| What it means | Possible problem with the keypad or user interface, the control or its wiring. |
| What you can check | Open the breaker for one minute, then close it. Stand by the oven for a minute to see if the code returns, and run the oven normally to check it works. |
| When to call a technician | Book a service visit when the code persists after the reset. Keypads and controls are electronic parts that need proper testing, so give the technician the exact code shown. |
What the text says
The user interface or keypad, the control, or the wiring may have a problem. Nothing in the text ranks those three or separates one code from another.
Resetting the range
Open the breaker and hold it open for one minute. Close it. Then stand by the oven for a minute to see if the code shows up again, and operate the oven normally to make sure it works.
The four numbers
- KitchenAid does not say why there are four.
- Jot down the exact code on your display, so that you can report it correctly.
When a reset is not enough
Owners are given no more steps, so a persistent code belongs with service. A keypad and a control are electronic parts, and they need to be tested properly.
Nearby codes
- F2E0: those same parts, with a keypad disconnected line on the technician sheet.
- F6E5 / F6EA / F8EA: user interface or its wiring only.
F2E3 to F2E6 FAQ
Are these four separate keypad faults?
KitchenAid words them identically, so the pages give each no meaning of its own.
Is the wall oven entry different?
No, the wall oven page repeats the keypad, control and wiring text.
Arranging range repair across our metro areas
Our service reaches the Miami, New York, Houston, Los Angeles and San Diego metro areas. Telephone (844) 919-2035 with the full code and a note about the breaker reset. The range repair page adds detail.
Source: KitchenAid Product Help, Ranges: Error Codes; KitchenAid Product Help, Wall Oven: Error Code or Message
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.