F2E1 on KitchenAid ranges: a stuck or held button, a grate level check, or reset-only guidance.
Model compatibility: KitchenAid reuses codes across series and model years, so F2E1 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
A button stuck or held too long on commercial-style ranges, a grate fit check on one range page, and a stuck key on the technician sheet.
One code, several readings
Support pages disagree about F2E1, so here is what each document says.
At a glance
| Code | F2E1 |
|---|---|
| What it means | A stuck or over-held button, or a grate that is not seated correctly, depending on the range. |
| What you can check | Let the range cool, then rock each grate and swap any that wobble. Also look over the control buttons for debris, then take the range off power for five minutes by plug or breaker. |
| When to call a technician | If F2E1 survives the grate and button checks and the power reset, arrange a service visit. The keypad, control or wiring may need testing by a technician. |
| Document | Reading |
|---|---|
| Commercial-style range, owner page | A button is stuck or was held down too long; check buttons for debris |
| Commercial-style range, blinking lights | Only reset steps, no cause |
| Range page (one range model) | Grates should be installed correctly and sit level |
| Technician sheet | Stuck key |
KitchenAid does not explain the split or say which range goes with which reading. None is chosen over the others here.
If your page mentions grates
First let the range cool. Then rock each grate with your hand. A grate that wobbles might be on backwards, so switch the grates around as KitchenAid advises. To finish, cycle the power to the range so the code can clear.
If your page mentions buttons
Examine the control buttons and clear any debris you find. Then take the range off power for five minutes, by unplugging it or flipping the breaker, and restore power afterward. On the blinking-lights page, the first step is turning the temperature knob to OFF. When the code lingers, switch the breaker off for a minute, restart, and keep watching for another minute.
Calling for service
The owner steps end there. The range page also puts the user interface or keypad, the control or the wiring on the list for F2E1, so a code that survives everything above warrants a visit.
Related F2 codes
- F2E2: reset steps on commercial-style pages, keypad or control on the range page.
- F2E0: user interface or keypad, control and wiring.
Repair for F2E1 in our metro areas
KitchenAid range service is offered in the Miami, New York, Houston, Los Angeles and San Diego metro areas at (844) 919-2035. Have ready the model number and the checks you already ran. Find more on the range repair page.
Source: KitchenAid Product Help, Commercial-Style Range: Error Codes; KitchenAid Product Help, Ranges: Error Codes; KitchenAid Product Help, Commercial Style Error Codes
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.