On commercial-style KitchenAid ranges F6E3 ties to an over-hot self-clean. Other pages say Appliance Manager. Reset steps inside.
Model compatibility: KitchenAid reuses codes across series and model years, so F6E3 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
KitchenAid says F6E3 on commercial-style ranges means the oven got too hot during self-clean with controls locked until it cools; its ranges page names the Appliance Manager or wiring.
What the manufacturer describes
The commercial-style article says F6E3 means the oven’s inner temperature got too high during self-clean. As protection, the controls stay locked until the oven cools down. KitchenAid’s ranges article offers a different explanation: a possible problem with the Appliance Manager or its wiring, with a variety of reasons possible. A summary of tech sheet W11393917 Rev B reads “over temperature, warming drawer”, and that is the only place a warming drawer is mentioned. None of the pages indicates which explanation fits a particular range.
At a glance
| Code | F6E3 |
|---|---|
| What it means | Oven got too hot during self-clean, with controls locked until it cools, or a possible Appliance Manager or wiring fault. |
| What you can check | Allow the oven to cool, then disconnect the range for five minutes at the plug or breaker. A standard range needs only a one-minute breaker reset and a one-minute watch. |
| When to call a technician | Once the oven is cool and power was cycled, nothing else is left for you to do. A technician must work on the Appliance Manager and its wiring if F6E3 stays. |
What to do, in order
- Allow the oven to cool, since the controls stay locked until then.
- Disconnect the range for five minutes using the plug or the breaker; reconnect afterwards.
- Or follow the quick path: temperature knob to OFF; if the code is still there, breaker off for a minute, restart, and a minute of monitoring.
- For a standard range, do the one-minute breaker reset and one-minute watch from the Ranges page, then verify the oven operates.
When the resets fail
Once the oven is cool and power was cycled, nothing else appears in KitchenAid’s pages. Technician work is required on the Appliance Manager and its wiring.
Related
- F6E1: shares the self-clean wording and lists a cook-time over-temperature too.
- F6E4: Oven Appliance Manager or Oven Control.
KitchenAid oven service, our metro areas
Phone (844) 919-2035 from the Miami, New York, Houston, Los Angeles or San Diego metro areas when F6E3 will not clear. We would like the model number and to hear whether the range was mid-cycle. Read the range repair page for scope.
Source: KitchenAid Product Help, Commercial-Style Range: Error Codes; KitchenAid Product Help, Ranges: Error Codes; KitchenAid Product Help, Blinking Lights / Error Codes – Commercial Style; KitchenAid Tech Sheet W11393917 Rev B
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.