KitchenAid Range F6E1 Code: Over-Temperature and Locked Controls
KitchenAid gives F6E1 three explanations. See which fits, how to reset, and when to call for service.
Model compatibility: KitchenAid reuses codes across series and model years, so F6E1 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
KitchenAid says commercial-style ranges show F6E1 when the oven is too hot during self-clean, with controls locked until it cools; the ranges page names the Appliance Manager or wiring.
What the three sources say
| Source | Explanation of F6E1 |
|---|---|
| Commercial-style range help | Temperature inside the oven too hot during self-clean; controls locked until it cools down, to protect the range |
| Ranges help | The Appliance Manager or the wiring around it may be the problem; KitchenAid notes a variety of reasons |
| Tech sheet W11393917 Rev B | Over temperature during cook |
Those are separate causes, and nothing in the sources picks between them. Had you been running a self-clean at the time, the first row is the closest match.
At a glance
| Code | F6E1 |
|---|---|
| What it means | Oven too hot during self-clean, with controls locked until it cools, or a possible Appliance Manager or wiring fault. |
| What you can check | Let the oven cool first, since the controls stay locked until it does. Then keep the range off power for five minutes, or turn the knob to OFF; on a standard range use a one-minute breaker reset. |
| When to call a technician | A returning F6E1 means trouble remains after the resets. A technician needs to test the Appliance Manager and its wiring, so book a service visit. |
Patience with the lock
Controls on a commercial-style range remain locked until the oven has cooled down. Straight after a self-clean the cavity and the door surfaces are hot, so wait before handling anything.
Resetting
A power cycle means leaving the range disconnected for five minutes (plug or breaker) before restoring it. KitchenAid also offers a shortcut: the temperature knob set to OFF cancels the error, and if F6E1 persists after that the breaker goes off for a minute, followed by a restart and a minute of monitoring. Standard ranges follow the Ranges article: one minute off at the breaker, one minute of observation.
After a repeat
A returning code tells you the trouble remains after the resets. A technician tests the Appliance Manager and the wiring around it, so this turns into a service call.
See also
- F6E3: same wording about self-clean over-temperature.
- F5E5: self-clean that did not reach temperature in 30 minutes.
KitchenAid range service by metro area
We cover KitchenAid range calls in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Call (844) 919-2035, say whether F6E1 came during self-clean, and give your model number. The range repair page has details.
Source: KitchenAid Product Help, Commercial-Style Range: Error Codes; KitchenAid Product Help, Ranges: Error Codes; KitchenAid Product Help, Blinking Lights / Error Codes – Commercial Style; KitchenAid Tech Sheet W11393917 Rev B
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.