KitchenAid Range F6E0 Code: Oven Control or Appliance Manager
Standard KitchenAid ranges tie F6E0 to the oven control or Appliance Manager; commercial-style pages offer resets.
Model compatibility: KitchenAid reuses codes across series and model years, so F6E0 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
KitchenAid says F6E0 may be a problem with the oven control, the Appliance Manager or the associated wiring, and commercial-style pages offer reset steps only.
Two sets of KitchenAid pages
| Range type | What the help says about F6E0 |
|---|---|
| Standard (Ranges article) | Possible problem with the Oven Control, the Appliance Manager or the wiring. |
| Commercial-style (two articles) | No cause stated; reset steps only. |
The source leaves the difference unexplained, so decide which group fits your range and stay with it.
At a glance
| Code | F6E0 |
|---|---|
| What it means | Possible problem with the oven control, the Appliance Manager or their wiring. |
| What you can check | For a standard range, turn the breaker off for one minute, then on, and watch the display for a minute. On a commercial-style range, turn the temperature knob to OFF first. |
| When to call a technician | If F6E0 returns after the reset, call for service and say which reset path you used. Home servicing of the oven control or Appliance Manager is not an option. |
Commercial-style: resetting
As with a computer, KitchenAid says, resetting a control can sometimes resolve the issue. Two options exist. One: take the range off power for five minutes, unplugging it or using the breaker, then reconnect. Two: start by turning the temperature knob to OFF, and if F6E0 persists after that, leave the breaker off for a minute, power up and monitor the range for a minute.
Standard range: resetting
The Ranges article asks for the breaker to be off for one minute and then on. Next comes a minute of keeping watch to confirm the code stays away, and a check of oven operation.
What the named parts are
The oven control is the electronics side of the oven. The Appliance Manager is a second control, which KitchenAid names without any further description. Home servicing of either is not an option.
Compare with these
- F6E4: a close relative naming those same controls.
- F6E1: also names the Appliance Manager and explains a self-clean case.
- F6E5: points to the User Interface, not the control.
KitchenAid range repair, metro coverage
We handle KitchenAid ranges in the Miami, New York, Houston, Los Angeles and San Diego metro areas. For a F6E0 that returns, phone (844) 919-2035 and tell us which reset path you used. See the range repair page.
Source: KitchenAid Product Help, Ranges: Error Codes; KitchenAid Product Help, Commercial-Style Range: Error Codes; KitchenAid Product Help, Blinking Lights / Error Codes – Commercial Style
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.