F6EA lists a possible over-temperature reading at the user interface control, or a wiring fault. KitchenAid gives a breaker reset.
Model compatibility: KitchenAid reuses codes across series and model years, so F6EA may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Possible problem with the User Interface Control sensing an over temperature condition, or with its wiring.
On a KitchenAid wall oven, F6EA means the user interface control could be sensing an over temperature condition. The other possibility the manufacturer lists is a problem with the wiring.
At a glance
| Code | F6EA |
|---|---|
| What it means | The user interface control may be sensing an over-temperature condition, or its wiring may be at fault. |
| What you can check | Switch off the breaker for the oven and wait sixty seconds, then switch it on. Stay by the oven for one minute and look for F6EA, then operate the oven to verify that it runs. |
| When to call a technician | If F6EA is back after the reset, request service. A temperature warning on a control board is best left to someone equipped to diagnose it. |
Which component is hot
The keypad or display is driven by the user interface control, an electronic board, and the entry presents that board as the reporter of excess heat. The article stays vague otherwise, offering no value, no reason for running hot, and no sensor position.
The two readings
- Over temperature sensed by the control
- A fault in the associated wiring
How to distinguish the two is not described.
Reset sequence
Switch off the breaker for the oven and wait sixty seconds. Switch it on again. Stay by the oven for one minute and look for F6EA, then operate the oven to verify that it runs.
Why service is the next step
If F6EA is back after the reset, request service. A temperature warning on a control board is best left to someone equipped to diagnose it.
Common questions
Do I wait for the oven to cool and retry? The article does not mention cooling. The breaker reset is the only step listed.
See also
- F6E5 for the control panel assembly
- F1E0 for the touchpad and control
- F8E2 / F8E3 for the oven cooling fan or wiring
Oven control repair in our metro areas
For KitchenAid wall ovens in the Miami, New York, Houston, Los Angeles and San Diego metro areas, call (844) 919-2035. Please have F6EA, the model number and your reset result ready.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.