KitchenAid Wall Oven F1E1 Code: Oven Appliance Manager Control
F1E1 names the oven appliance manager control or its wiring. A breaker reset is the single listed step.
Model compatibility: KitchenAid reuses codes across series and model years, so F1E1 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Possible problem with the oven appliance manager control or its wiring.
The entry in one line
For F1E1, the KitchenAid wall oven help names the Oven Appliance Manager Control, or the wiring, as a possible trouble spot. Beyond that there is only the reset.
At a glance
| Code | F1E1 |
|---|---|
| What it means | Possible problem with the oven appliance manager control or its wiring. |
| What you can check | Turn the oven breaker off for one minute and switch it back on. Watch the display for another minute, then run the oven to confirm it works normally. |
| When to call a technician | If F1E1 returns after the reset, a technician is needed, since the control and its wiring are electrical parts. Mention that you already cycled the breaker. |
Reset, in short
- Breaker off, one minute.
- Breaker back on.
- Sixty seconds of observation for any sign of F1E1.
- A test that the oven operates.
If F1E1 has left, the reset did its job. If it returns, KitchenAid’s help gives you nothing else to do and service is the answer, because both the control and its wiring are electrical parts for a technician.
What “appliance manager” means here
The manufacturer leaves the term undefined. The name suggests a board in charge of the oven. Neighboring entries in the article mention a Microwave Appliance Manager and a Lower Oven Appliance Manager, so there are several such managers across the product line.
FAQ
Is F1E1 a microwave code? No. Microwave managers are under F1E3, F6E7 and others; F1E1 concerns the oven side.
Where is the part? The article does not locate the control or the wiring, or explain how to get to them.
Does the keypad play a part? None is mentioned. Keypad and touchpad faults have their own codes.
Compare these
- F6E9: lower oven’s manager
- F1E3 / F6E7: manager on the microwave side
- F1E0: touchpad, control or wiring
Oven service in the metro areas
From the Miami, New York, Houston, Los Angeles and San Diego metro areas, call (844) 919-2035 if F1E1 returns. We will want the code, the model number and a note that you cycled the breaker. See the oven repair page too.
Source: KitchenAid Product Help, Wall Oven: Error Code or Message
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.