F6E9 concerns the lower oven's appliance manager or its wiring. Reset at the breaker, then call if it returns.
Model compatibility: KitchenAid reuses codes across series and model years, so F6E9 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Possible problem with the Lower Oven Appliance Manager or its wiring.
If a double KitchenAid wall oven shows F6E9, the help article is pointing at the lower oven appliance manager or the wiring connected to it.
At a glance
| Code | F6E9 |
|---|---|
| What it means | Possible problem with the Lower Oven Appliance Manager or its wiring. |
| What you can check | Turn the breaker off, count one minute, then turn it on. Observe for one more minute to check that F6E9 stays away, and make sure the oven runs. |
| When to call a technician | If F6E9 is still showing, arrange a service visit. Mention that the code names the lower cavity and whether it returned immediately or after a while. |
What the name tells you
“Lower” refers to the bottom cavity, which has an appliance manager separate from the top one. The top cavity’s code is F6E6. KitchenAid adds nothing else, for instance about communication between the boards.
What to do
- Turn the breaker off.
- Count one minute.
- Turn the breaker on.
- Observe for one more minute and check that F6E9 stays away.
- Make sure the oven runs.
When it returns
If the code is gone, you are finished. If not, the manufacturer’s next step is service. It does not mention replacing parts, checking connections or any reset beyond the breaker.
Handy facts for a technician
Note the code, that it names the lower cavity, and that you cycled the breaker for a minute. It also helps to mention if the lower door closes normally and whether F6E9 returned immediately or after a while.
Short answers
- Upper oven? The entry says only “lower”. Check both cavities after the reset.
- Temperature sensor? Not mentioned for this code; that wording is in the F3E1 entries.
- Another lower-oven code? F5E3 / F5E4 concerns the door latch.
KitchenAid oven repair by metro area
Our team takes KitchenAid wall oven requests in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Call (844) 919-2035, give the code and model number, and tell us what the reset changed.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.