KitchenAid Dishwasher F8EC Error Code
If your KitchenAid dishwasher shows F8EC, start with the safe checks here — the code often tracks flow before any parts talk.
Reviewed for clarity on KitchenAid appliances; always match the code to your specific model.
KitchenAid dishwasher code F8EC: Flow — verify on your tech sheet.
Model compatibility: KitchenAid reuses codes across series and model years, so F8EC may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Wash-flow related fault. Two KitchenAid units can share a display string yet mean different subsystems; verify the definition for your serial family.
Symptoms you may notice
- The dishwasher shows F8EC and over- or under-fills
- The cycle stalls with F8EC displayed
- Water levels seem wrong when F8EC appears
Possible causes
- A pressure switch or level sensor
- A blocked pressure hose or chamber
- A control interpreting levels as a fault
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
- Check the accessible filter for blockages
- Confirm drainage access is clear
- Perform a manufacturer-approved restart
- Write down when F8EC appeared and which cycle or mode was running
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
What not to attempt
- Do not open internal panels or access high-voltage components
- Do not bypass door locks, safety switches or interlocks
When to call a technician
Persistent F8EC after one careful reset is a technician visit. Artisan Repair serves KitchenAid appliances as an independent repair shop.
Likely related component
pressure switch / level sensor
Frequently asked questions
Wash-flow related fault.
Clearing the display is not the same as fixing the cause. If F8EC comes back, schedule diagnosis.
Platform families overlap, but Artisan Repair still confirms F8EC against your serial family.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.