KitchenAid Dishwasher F9E0 Error Code
A KitchenAid dishwasher raising F9E0 deserves a calm read of drain clues — not a rush to open sealed or live panels.
KitchenAid homeowner guide language only — not a factory service procedure.
KitchenAid dishwasher code F9E0: Drain — verify on your tech sheet.
Model compatibility: KitchenAid reuses codes across series and model years, so F9E0 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Drain-path fault. Artisan Repair uses the code as a starting clue; final diagnosis still follows your appliance’s documentation.
Symptoms you may notice
- The dishwasher stops mid-cycle and shows F9E0
- Water is left standing in the dishwasher
- Draining seems slow, noisy or incomplete
Possible causes
- A blocked or dirty filter (on models that have one)
- A kinked, clogged or poorly routed drain hose
- A restricted drain pump or drain path
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
- Check and clean the accessible filter if your model has one
- Check the visible drain hose for kinks or blockages
- Confirm the drain or standpipe access is clear
- Write down when F9E0 appeared and which cycle or mode was running
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
What not to attempt
- Do not open internal panels or access high-voltage components
- Do not bypass door locks, safety switches or interlocks
When to call a technician
For recurring F9E0, independent service is safer than guessing parts. Artisan Repair will diagnose on site and estimate before any repair.
Likely related component
drain pump or drain hose
Frequently asked questions
Drain-path fault.
One breaker reset is reasonable. Recurring F9E0 means the fault is still present — do not keep resetting without checks.
Treat shared wording as a clue only — verify F9E0 before buying parts.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.