KitchenAid Dishwasher F10E5 Error Code
If your KitchenAid dishwasher shows F10E5, start with the safe checks here — the code often tracks overflow before any parts talk.
KitchenAid homeowner guide language only — not a factory service procedure.
F10E5 on KitchenAid dishwasher appliances often means Overflow.
Model compatibility: KitchenAid reuses codes across series and model years, so F10E5 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Overflow-related fault — disconnect power if water is near electrics. If your manual lists a different description for this code, trust the manual over any general summary.
Symptoms you may notice
- The dishwasher halts and displays F10E5
- You notice moisture or water near the dishwasher
- The dishwasher won’t resume its cycle normally
Possible causes
- A minor internal leak reaching the base
- A loose or aging hose connection
- Residual water triggering the protection system
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
- Switch the appliance off and, if safe, disconnect power
- Check for visible water under or behind the appliance
- Confirm hoses and connections are not visibly dripping
- Keep notes on any recent power outages, filter changes, or installs before the visit
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
What not to attempt
- Do not open internal panels or access high-voltage components
- Do not bypass door locks, safety switches or interlocks
When to call a technician
Call Artisan Repair if F10E5 comes back, the appliance will not run safely, or you smell burning / see standing water near electrics.
Likely related component
anti-leak / base sensor
Frequently asked questions
Overflow-related fault — disconnect power if water is near electrics.
Safe homeowner resets may clear F10E5 temporarily; sealed, gas, and live-board work stay with a technician.
Platform families overlap, but Artisan Repair still confirms F10E5 against your serial family.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.