KitchenAid Oven F1E1 Error Code
F1E1 indicates the electronic oven control detected an internal fault during its self-check.
F1E1 decoded as an EOC internal/communication fault, consistent with KitchenAid Whirlpool-family control documentation.
F1E1 indicates the electronic oven control detected an internal fault during its self-check.
Model compatibility: KitchenAid reuses codes across series and model years, so F1E1 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
F1E1 indicates the electronic oven control (EOC) detected an internal fault during its self-check. On a single oven this generally points to the control board itself; on a double oven it can also mean the upper and lower control boards have stopped communicating with each other over the connecting harness. KitchenAid ovens and ranges use Whirlpool-family electronic oven controls (EOC) across several generations; the exact fault behind a given F#E# pair can vary slightly by model and control generation. Record your model and serial numbers and confirm against your appliance documentation.
Symptoms you may notice
- F1E1 on the display
- The oven may lock out heating or the display may freeze
- On double ovens, one cavity may show the code while the other keeps working
Possible causes
- An internal control-board fault or failed self-test
- A loose or damaged wiring harness between control boards (double ovens)
- Solder-joint or component stress after repeated high-heat cycles
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
- One breaker power cycle for two minutes
- Note whether the fault started after a self-clean cycle or a power surge
- Record the full model and serial number for the technician
Important safety warning. Do not open internal panels, access high-voltage wiring, or bypass any safety device. If you ever smell gas, stop immediately, do not operate any switches, leave the area and contact your gas provider and a qualified technician. If you see smoke, sparks, a burning smell, or water near electrical parts, switch the appliance off at the outlet if it is safe to do so and call a professional.
What not to attempt
- Do not open internal panels or access high-voltage components
- Do not bypass door locks, safety switches or interlocks
- Do not adjust, disconnect or repair any gas connection or valve
Likely related component
Electronic oven control (EOC) board
Frequently asked questions
Not always — a brief power interruption can sometimes trigger a false reading. If F1E1 returns after one power cycle, the control board (or the harness between boards on a double oven) typically needs professional diagnosis.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.