F1E0 on a KitchenAid wall oven refers to the touchpad (user interface), the control or the wiring. A breaker reset is the listed step.
Model compatibility: KitchenAid reuses codes across series and model years, so F1E0 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Possible touchpad (user interface), control or wiring problem on a wall oven.
What F1E0 says
KitchenAid ties F1E0 to the oven’s touchpad. Its three possibilities are the user interface (touchpad), the control, and the wiring. They are not ranked, and an owner cannot tell them apart by looking at the oven.
At a glance
| Code | F1E0 |
|---|---|
| What it means | Possible problem with the oven touchpad (user interface), the control, or the wiring. |
| What you can check | Start with the breaker: off for a minute, then back on. Over the next minute watch for F1E0, then check the oven operates. Note whether the touchpad still responds. |
| When to call a technician | If F1E0 returns after the reset, have a technician repair it. The touchpad, control and wiring are all electrical, and there is no further step an owner can safely take. |
Common questions
What does each part do? You enter times and temperatures on the touchpad. The control acts on its signals. Wiring connects them.
Is there a code-clearing trick? The only procedure given is the power reset.
Does the touchpad still work with F1E0 up? KitchenAid does not say, and it does not say which buttons are affected or whether the code arrives at startup or in a cycle. Those facts help a technician, so record them if you can.
How does F1E0 differ from similar codes? F2E0 and its group name the user interface or keypad, the control and wiring. 1C1C and 1C2C name the user interface/keypad and wiring, without the control.
Reset sequence
- Turn the oven’s breaker off, wait for a minute, and turn it back on.
- Over the next minute, look for F1E0.
- Check the oven operates.
This is the entire procedure in the article.
After the reset
If F1E0 is gone and the oven works, you are done. If it returns, the article stops giving owner steps, and since the touchpad, control and wiring are all electrical, a technician should repair them.
Next entries
- F2E0 and related: keypad-oriented codes
- 1C1C / 1C2C: keypad and wiring, no control
Touchpad service in the metro areas we serve
If F1E0 returns, call (844) 919-2035 from the Miami, New York, Houston, Los Angeles or San Diego metro areas. Mention whether the touchpad responds and what the oven was doing at the time.
Source: KitchenAid Product Help, Wall Oven: Error Code or Message
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.