With F0E0 the oven control cannot say what kind of problem happened. KitchenAid lists a breaker reset.
Model compatibility: KitchenAid reuses codes across series and model years, so F0E0 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
The oven control cannot recognize what type of problem occurred; a control system component or its wiring may be at fault.
F0E0 is the KitchenAid code that admits a gap instead of naming something. The wall oven help says the electronic oven control shows it when it cannot recognize the type of problem that has happened.
At a glance
| Code | F0E0 |
|---|---|
| What it means | The oven control cannot recognize what type of problem occurred; a control system component or its wiring may be at fault. |
| What you can check | The only owner action is one reset. Switch the oven's breaker off, wait sixty seconds, switch it on, watch the display for a minute, then try the oven to see that it runs. |
| When to call a technician | If F0E0 keeps coming back, book a technician. The cause cannot be narrowed down from the display, and looking into the control system is not homeowner work. Describe what the oven was doing when the code appeared. |
How to read it
The oven knows something has gone wrong but has no category for it. KitchenAid then waves broadly toward some component within the oven control system, toward the electronic control itself, or toward the wiring. Because the entry is that general, resetting is the only owner action, and you get less direction than from a latch or sensor message.
Questions
Can F0E0 reveal which part is failing? No. Failing to sort the problem is the reason the code exists.
Is there a companion code? The article lists none. The display on your oven is what you have to report.
One reset
- Breaker to off.
- Sixty seconds of waiting.
- Breaker to on.
- One more minute of watching the display for F0E0.
- Last, try the oven and see that it runs.
If it keeps coming back
There is nothing more in KitchenAid’s help for owners. Looking into the control system is a technician’s work, and a homeowner cannot narrow the cause down from the display alone.
See also
- F06: specifically the electronic control or its wiring
- F1E1: a code that does name the oven’s manager board
Oven control service in our metro areas
Customers in the Miami, New York, Houston, Los Angeles and San Diego metro areas can use (844) 919-2035 when F0E0 persists. Describe the oven’s activity when the code showed, since a code without a named part leans on that description. Our oven repair page has more.
Source: KitchenAid Product Help, Wall Oven: Error Code or Message
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.