For F3E9 on a commercial-style KitchenAid range, reseat the meat probe and then reset power.
Model compatibility: KitchenAid reuses codes across series and model years, so F3E9 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Meat probe may not be installed correctly (commercial-style range).
Where F3E9 shows up
The code is found only on KitchenAid’s commercial-style range pages. Its entry is short and raises one question: is the meat probe installed correctly?
At a glance
| Code | F3E9 |
|---|---|
| What it means | The meat probe may not be installed correctly on a commercial-style range. |
| What you can check | Wear an oven mitt and confirm the probe is fully seated or plugged in. Then turn the temperature knob to OFF, or keep the range off power for five minutes at the plug or breaker. |
| When to call a technician | If F3E9 keeps coming back after the probe check and the reset, a technician should inspect the range. No other owner step applies. |
Owner page
Wear an oven mitt or hold a potholder, then confirm the probe is fully seated or plugged in. A power cycle follows. KitchenAid likens it to restarting a computer: the control panel must stay disconnected from power for five minutes, either by unplugging the range from its outlet or by switching off the breaker. Power is then restored.
Blinking-lights page
KitchenAid lists F3E9 with no cause and gives these steps:
- Turn the temperature knob to OFF, which cancels the error and lets the range be used again.
- If the code stays, switch the breaker off for a minute.
- Restart the cycle and monitor for a minute.
- Verify the range works.
Do they fit together?
Yes, they do not contradict each other. Check the probe, then reset, and both pages are covered. Nothing but the meat probe is named as a part.
If the code keeps coming back
KitchenAid lists nothing more for owners, so a technician should inspect the range.
See also
- F3E3: also a probe check, with a range-page sensor note.
- F3E4 / F8: probe not secure in its receptacle.
Commercial-style range repair in our metro areas
Service for KitchenAid commercial-style ranges covers the Miami, New York, Houston, Los Angeles and San Diego metro areas. Call (844) 919-2035 and have the model number ready. More on the range repair page.
Source: KitchenAid Product Help, Commercial-Style Range: Error Codes; KitchenAid Product Help, Commercial Style Error Codes
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.