Reseat the meat probe first when a commercial-style KitchenAid range shows F3E3; a range page also names the oven sensor or wiring.
Model compatibility: KitchenAid reuses codes across series and model years, so F3E3 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Meat probe may not be installed correctly; a range page names the oven temperature sensor or its wiring.
A question comes first with F3E3 on a KitchenAid commercial-style range: has the meat probe been installed properly? One more range page gives a different explanation, the oven temperature sensor or its wiring.
At a glance
| Code | F3E3 |
|---|---|
| What it means | The meat probe may not be seated correctly, or the oven temperature sensor or its wiring may be at fault. |
| What you can check | Wearing a mitt, push the meat probe all the way into its socket and see if the code clears. If not, cut power to the range for five minutes at the plug or breaker. |
| When to call a technician | If the probe is firmly in and a reset changes nothing, leave further diagnosis of F3E3 to a technician. |
Check the probe
Protect your hand with a mitt or a potholder first. The owner page wants the probe pushed all the way home in its socket. After pressing it in firmly, look at the display to see whether the code is gone.
Reset choices if that does not help
- Owner page: cut power to the range for five minutes. A range with a plug can simply be unplugged; otherwise use its breaker. Then bring power back.
- Blinking-lights page: start by moving the temperature knob to OFF; that clears the error. If the code lingers, put the breaker off for sixty seconds, start again, and observe for one minute.
- Range page: breaker off for a minute, back on, a minute of watching, then see that the oven operates.
How the pages relate
The owner page deals with the probe, the blinking-lights page gives a reset with no cause, and the range page points to the sensor or wiring. KitchenAid does not bring them together. Since reseating the probe costs nothing, do it before blaming the sensor.
Calling it
When the probe is firmly in and a reset changes nothing, leave further diagnosis to a technician.
Probe codes next door
- F3E4 / F8: the probe is not properly in its receptacle.
- F3E9: the same probe check for commercial-style ranges.
Range repair for F3E3 across our metros
For KitchenAid ranges in the Miami, New York, Houston, Los Angeles and San Diego metro areas, ring (844) 919-2035. Tell us whether the probe was in use. Read the range repair page for the outline.
Source: KitchenAid Product Help, Commercial-Style Range: Error Codes; KitchenAid Product Help, Ranges: Error Codes; KitchenAid Product Help, Commercial Style Error Codes
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.