KitchenAid lists F5E7 under the oven door latch assembly, door switch and wiring, with a breaker reset to try.
Model compatibility: KitchenAid reuses codes across series and model years, so F5E7 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
KitchenAid says the oven door latch assembly, the door switch or the associated wiring may be the problem behind F5E7.
The entry in brief
Seeing F5E7 on a KitchenAid range means, per the manufacturer, a possible problem with the Oven Door Latch Assembly, the Door Switch, or the associated wiring. The company’s wall oven help uses identical words, and in each place the explanation ends.
At a glance
| Code | F5E7 |
|---|---|
| What it means | Possible problem with the oven door latch assembly, door switch or their wiring. |
| What you can check | Cut power at the breaker and wait one minute, then restore it. Watch the display for a minute, then run the oven normally to verify operation. |
| When to call a technician | A repeat of F5E7 calls for a service visit. Latch, switch and wiring faults cannot be told apart from the outside, and there is no home test for them. |
Reset by the breaker
- Cut power at the breaker and wait one minute.
- Put power back.
- Watch the display for a minute. KitchenAid asks for this to make sure the code is not displayed again.
- Run the oven normally to verify operation.
A home fix is unlikely
From the outside, a switch or latch fault looks like a wiring fault, and KitchenAid provides no test for either one. After the reset the page has nothing else for you. A repeat of F5E7 calls for a service visit.
What “may be a problem” tells you
KitchenAid does not say the part “is” faulty. The wording lists areas to examine, in the order latch assembly, door switch, wiring, and gives no means of narrowing them from the keypad. Nor does this ranges-page entry mention an incorrectly installed door, so no reseating step applies.
Other F5 codes
Plain F5 mentions door latch switches along with the latch assembly and wiring. F7E0 drops the switch and lists latch assembly and wiring only. F5E5 is different again: it mentions hinges or a gasket after a slow self-clean heat-up.
Range repair in the metro areas we serve
We take KitchenAid range calls in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Phone (844) 919-2035 with F5E7 and say the breaker has been cycled. More on the range repair page.
Source: KitchenAid Product Help, Ranges: Error Codes; KitchenAid Product Help, Wall Oven: Error Code or Message
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.