FCE7 reports that the oven never connected to the router. Two resets are listed; if both fail, service is the next step.
Model compatibility: KitchenAid reuses codes across series and model years, so FCE7 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
KitchenAid reports that the appliance did not connect to the router, with no link from the Wi-Fi module to the internet.
What FCE7 reports
The oven did not connect to the router. KitchenAid’s wording for the cause is “no link between the Wi-Fi module and the internet.”
At a glance
| Code | FCE7 |
|---|---|
| What it means | KitchenAid reports that the appliance did not connect to the router, with no link from the Wi-Fi module to the internet. |
| What you can check | Turn the oven off at its breaker for a minute, then on. Start a cycle and watch for one minute for FCE7 again, then reset your wireless router and check that the oven runs. |
| When to call a technician | If FCE7 remains after the oven and router are both reset, there is nothing more for you to do. Contact a technician and mention the two resets. |
Reset list
- Turn the oven off at its breaker and leave it a minute.
- Turn the breaker on again.
- Start a cycle and monitor the oven for one minute for another FCE7.
- Verify the oven operates.
- Reset the wireless router.
Compared with the other FCE codes
- KitchenAid’s FCE7 article names no part and no wiring, unlike the codes before it.
- It also skips the signal-strength advice.
- What is left is a breaker reset and a router reset.
- To see whether the Wi-Fi itself is the trouble, take a smartphone or tablet to the oven and test whether other devices connect there. This check appears in KitchenAid’s related Wi-Fi articles, not under FCE7.
Which comes first
The FCE7 article lists the oven’s breaker power cycle first and the router reset afterward. Both are its own steps.
Code still showing
With the oven and router both reset and FCE7 remaining, the article has nothing further for you to do. Get in touch with service and mention the two resets.
See also
- FCE8: registration error from the app setup, not signal trouble
- FCE4 and FCE5: internal Wi-Fi antenna codes that leave the router out
Oven service in our five metro areas
For KitchenAid wall ovens in Miami, New York, Houston, Los Angeles and San Diego, call (844) 919-2035. Say that FCE7 is showing, give the model number and tell us the resets were done. See also the oven repair page.
Source: KitchenAid Product Help, Wall Oven: Error Code or Message
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.