FCE6 and FCE9 flag the Wi-Fi power module or wiring. Run the breaker reset once; a code that returns is service work.
Model compatibility: KitchenAid reuses codes across series and model years, so FCE6 / FCE9 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
KitchenAid points to a possible Wi-Fi power module or wiring problem.
When a KitchenAid wall oven displays FCE6 or FCE9, the manufacturer’s pointer is the Wi-Fi power module along with its wiring. Your own wireless network is not given as a cause in either article.
At a glance
| Code | FCE6 / FCE9 |
|---|---|
| What it means | KitchenAid points to a possible Wi-Fi power module or wiring problem. |
| What you can check | Shut off the oven's breaker, leave it off a full minute, then switch it on. Monitor the oven for one minute in case the code reappears, and verify that it operates. |
| When to call a technician | If FCE6 or FCE9 returns, a technician needs to look at the module and its wiring. Getting to them means taking parts off the oven with the power disconnected. |
Doing the breaker reset
Shut off the oven’s breaker and leave it off a full minute, then switch it on. KitchenAid next asks you to monitor the oven for one minute in case the code reappears, and to verify that it operates.
Quick reference
- FCE6: the module or its wiring is suspected; the full sequence applies, including the minute of watching and the operation check.
- FCE9: same suspect; the article stops after the one-minute breaker cycle.
About the module
This module is one piece of the wireless circuitry in the oven. KitchenAid does not say if cooking is affected.
Calling a technician
A code that returns calls for a closer look at the module and its wiring. Getting to them means taking parts off the oven, so the job is for a technician, with the power disconnected.
Other connectivity codes
- FCE4 and FCE5: the antenna side of the Wi-Fi hardware
- FCE1, FCE2 and FCE3: connection failures involving the router
Wall oven service in Miami, New York, Houston, Los Angeles and San Diego
Our line for these metro areas is (844) 919-2035. Have the FCE6 or FCE9 code and the oven model number ready. The oven repair page lists what we cover.
Source: KitchenAid Product Help, Wall Oven: Error Code or Message; KitchenAid Product Help, Ranges: Error Codes
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.