F7E2 comes with reset instructions but no named cause, for both wall ovens and commercial-style ranges.
Model compatibility: KitchenAid reuses codes across series and model years, so F7E2 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Code listed by manufacturer; source gives reset steps only and states no cause.
Two KitchenAid help articles include F7E2, the wall oven page and the commercial-style range page, and each treats it the same way: ways to clear the code, no explanation of the trigger.
At a glance
| Code | F7E2 |
|---|---|
| What it means | Reset-only code; no cause or component is named for it. |
| What you can check | On a wall oven, switch the breaker off for a minute, back on, and observe for a minute. If your range has a temperature knob, first move it to OFF to cancel the error. |
| When to call a technician | If the code repeats after both resets, a technician takes it from there. No cause or part is named, so there is nothing further an owner can check. |
Side by side
| Article | Instruction |
|---|---|
| Wall oven | Switch the breaker off for a minute, switch it on, observe for a minute and verify that the oven operates. Nothing else is listed for wall ovens. |
| Commercial-style range | Move the temperature knob to OFF to cancel the error and resume use; if the problem persists, breaker off for a minute, restart, and monitor for a minute. |
Order of attempts
Appliances with a temperature knob get the gentler step first: knob to OFF, then see whether the code is gone. When it comes back, go on to the breaker reset. For a wall oven, the article lists the breaker reset alone.
What stays unknown
- No component is named.
- No wiring is implicated.
- No cause is given.
If the code repeats after both resets, the article points you to service, and a technician takes it from there.
Why the two articles differ
The range page includes a knob step and the wall oven page does not. The code is the same one in both.
Nearby codes
See F7E1 for the water boiler temperature sensor and F7E3 for the water filter if the display shows one of those.
Oven and range service by metro area
For a KitchenAid oven or range in the Miami, New York, Houston, Los Angeles or San Diego metro areas, call (844) 919-2035. Say whether the knob step and the breaker reset were both tried and give the model number.
Source: KitchenAid Product Help, Wall Oven: Error Code or Message; KitchenAid Product Help, Ranges: Blinking Lights / Error Codes, Commercial Style
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.