KitchenAid Wall Oven F6E0 Code: Appears When Starting a Cycle
F6E0 may show at the start of a cycle and has no stated cause. KitchenAid's answer is a breaker reset.
Model compatibility: KitchenAid reuses codes across series and model years, so F6E0 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
May appear when starting a cycle; KitchenAid states no cause.
No diagnosis stands behind this one. The extent of what the KitchenAid article offers on F6E0 is that it can show up when you start a cycle, plus a power reset.
At a glance
| Code | F6E0 |
|---|---|
| What it means | May appear when starting a cycle; no specific cause is given. |
| What you can check | Hold the oven's breaker off for sixty seconds, then switch it on. Confirm F6E0 stays away and run the oven to see that it works. Jot down which cycle you were starting. |
| When to call a technician | When F6E0 returns after the reset, set up a service visit. There is no owner step beyond the reset, and your notes on the cycle help the technician. |
The little that is stated
| Item | KitchenAid’s article |
|---|---|
| Timing | May appear when starting a cycle |
| Cause | None given |
| Part named | None |
| Remedy | Breaker reset |
Doing the reset
Hold the breaker for the oven off for sixty seconds, then switch it on. Confirm that F6E0 stays away (no watching time is given, though most similar codes have one), and run the oven to see that it works.
Notes that help a technician
Record which cycle you were trying to start, whether the code arrived at once or after a pause, and what the reset achieved and for how long. KitchenAid does not require any of it. It simply helps whoever services the oven afterwards.
After a repeat
When F6E0 returns following the reset, set up service, since KitchenAid lists nothing more for owners.
Other F6E codes
- F6E1 / F6E2 / F6E3: a pair of boards, manager plus converter
- F6E4: only the manager board, or wiring
Cycle-start problems: service in our metros
Our work covers the Miami, New York, Houston, Los Angeles and San Diego metro areas. Phone (844) 919-2035 and describe which cycle was starting when F6E0 came up; the oven repair page lists other helpful details.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.