KitchenAid Oven F3E0 Error Code
F3E0 means the oven temperature sensor (RTD) is reading open or out of range.
F3E0 decoded as an open RTD sensor circuit, aligning with RTD ERROR text-message documentation.
F3E0 means the oven temperature sensor (RTD) is reading open or out of range.
Model compatibility: KitchenAid reuses codes across series and model years, so F3E0 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
F3E0 means the oven temperature sensor (RTD) is reading open, or its resistance is higher than the control expects, so the control cannot confirm the cavity temperature. This aligns with the RTD ERROR text message used on some KitchenAid controls. KitchenAid ovens and ranges use Whirlpool-family electronic oven controls (EOC) across several generations; the exact fault behind a given F#E# pair can vary slightly by model and control generation. Record your model and serial numbers and confirm against your appliance documentation.
Symptoms you may notice
- F3E0 on the display
- The oven will not heat, or heating stops shortly after starting
- May appear during preheat
Possible causes
- An open RTD probe
- A broken or disconnected sensor wire
- A corroded connector at the sensor or control
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
- Allow the oven to cool fully
- One breaker power cycle for two minutes
- Contact authorized service for sensor resistance testing — do not probe live wiring
Important safety warning. Do not open internal panels, access high-voltage wiring, or bypass any safety device. If you ever smell gas, stop immediately, do not operate any switches, leave the area and contact your gas provider and a qualified technician. If you see smoke, sparks, a burning smell, or water near electrical parts, switch the appliance off at the outlet if it is safe to do so and call a professional.
What not to attempt
- Do not open internal panels or access high-voltage components
- Do not bypass door locks, safety switches or interlocks
- Do not adjust, disconnect or repair any gas connection or valve
Likely related component
Oven temperature sensor (RTD) — open circuit
Frequently asked questions
They describe the same class of fault — an open temperature sensor circuit — shown as a numeric or text code depending on the control.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.