A group of thirteen KitchenAid wall oven codes all point to the oven control or its wiring. Codes and reset inside.
Model compatibility: KitchenAid reuses codes across series and model years, so F3 / F6 / 1C31 / 1C32 … may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
KitchenAid gives thirteen wall oven codes the same explanation: a possible problem with the oven control or wiring.
Seeing F3 or F6, or a four-character code that starts 1C, 3D or 4D, on your KitchenAid wall oven? There are thirteen such codes sharing one manufacturer explanation, and it concerns the oven control or its wiring.
At a glance
| Code | F3 / F6 / 1C31 / 1C32 … |
|---|---|
| What it means | KitchenAid gives thirteen wall oven codes the same explanation: a possible problem with the oven control or wiring. |
| What you can check | Switch the breaker off for one minute, back on, and watch the display for another minute. Run the oven normally to see that it works. |
| When to call a technician | A returning code calls for service. The control and wiring are technician work, so do not open any panels. Give the exact code and oven details. |
Where each code falls
| Starts with | Codes |
|---|---|
| F | F3, F6 |
| 1C | 1C31, 1C32, 1C4C, 1C6C, 1C7C, 1C81, 1C82, 1C8C |
| 3D | 3D51 |
| 4D | 4D31, 4D32 |
The wall oven help page includes every one of these. F3 and F6 are also on the range page, worded the same. KitchenAid never explains the reason for so many numbers or what sets them apart.
Role of the oven control
As general background, the oven control is the electronic brain that works with the keypad or touch screen, reading your settings and choosing when to switch the heating on or off. KitchenAid says the trouble could lie in this control or in the wiring linking it to the rest of the oven.
Reset described by KitchenAid
- Switch the breaker off and leave it for one minute.
- Switch it back on.
- Keep an eye on the display for one more minute to see whether the code returns.
- Run the oven normally to make sure it works.
This is the only step an owner is given.
Beyond the reset
A returning code sends you to KitchenAid’s service scheduling. As wiring and control boards are technician work, do not open any panels.
Codes to compare
- F03 / F04: the electronic oven control.
- F06: electronic control or wiring.
- F4: the oven cavity control.
Wall oven service across our metro areas
If the code returns after the reset, phone (844) 919-2035 for KitchenAid wall oven service in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Have the exact code and the oven model ready, and tell us the breaker was cycled. See also the oven repair page.
Source: KitchenAid Product Help, Wall Oven Error Codes; KitchenAid Product Help, Ranges Error Codes
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.