On a KitchenAid wall oven with a microwave, F1E2 refers to the microwave controls or the wiring tied to them.
Model compatibility: KitchenAid reuses codes across series and model years, so F1E2 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
KitchenAid lists the microwave user interface or its wiring as the possible problem.
What F1E2 refers to
This code sits on the microwave side of a KitchenAid wall oven. Per the help text, the microwave user interface or its associated wiring may have a problem.
At a glance
| Code | F1E2 |
|---|---|
| What it means | Possible problem with the microwave user interface (controls) or its wiring on a wall oven with a microwave. |
| What you can check | Switch the oven's breaker off for one minute, then on again. Watch the oven for a minute to see whether F1E2 comes back, and use it to confirm it operates. |
| When to call a technician | If F1E2 returns after the reset, call a technician. The microwave controls are electrical, so they are not something to open up and check at home. |
Which ovens it applies to
A microwave is named in the entry, so the code is relevant for a wall oven with a microwave inside. The regular oven controls are not what it describes. On an oven without any microwave function the entry most likely does not apply, and the F1E0 and F2E0 entries may be closer to what you need.
Breaker reset from KitchenAid
- At the breaker panel, turn the oven’s breaker off.
- Count one minute.
- Turn the breaker on.
- Watch the oven for a minute to see whether F1E2 appears again.
- Use the oven and verify that it operates.
Notes on the terms
The phrase “microwave user interface” means the controls for the microwave function. Whether a button, the display or a connection is involved is not stated by KitchenAid. “Wiring” is simply the catch-all term for the connection side. The entry deals only with the microwave controls, so it does not say anything on its own about the regular oven functions.
If it comes back
No further owner step is offered once the reset is done. These controls are electrical, which makes the job one for a technician rather than something to open up and check at home.
See also
- F1E3 / F6E7 covers the microwave appliance manager.
- F1E6 covers the microwave thermistor or sensor.
Wall oven repair across our metro areas
For KitchenAid wall oven repair in the Miami, New York, Houston, Los Angeles and San Diego metro areas, call (844) 919-2035. Tell us F1E2 is showing, give the model number if you have it, and say that the breaker reset did not hold. Details are on the oven repair page.
Source: KitchenAid Product Help, Wall Oven: Error Code or Message
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.