KitchenAid Range F01, F02, F1-1, F1-2 Codes: Sensor, Control or Wiring
Ten range codes, one description: the oven temperature sensor, the control or its wiring, plus a breaker reset.
Model compatibility: KitchenAid reuses codes across series and model years, so F01 / F02 / F1-1 / F1-2 ... may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Possible problem with the oven temperature sensor, the control, or its wiring.
Ten range codes, one message. KitchenAid’s pages describe F01, F02, F1-1, F1-2, F1-3, F1-H, F1-L, F1, F2 and F3-1 with the same line: a possible problem with the oven temperature sensor, the control, or the wiring.
At a glance
| Code | F01 / F02 / F1-1 / F1-2 … |
|---|---|
| What it means | Possible problem with the oven temperature sensor, the control, or its wiring. |
| What you can check | Switch the range breaker off for a full minute, turn it back on and watch the display for a minute. Then use the oven normally to confirm it works. |
| When to call a technician | A returning code means a technician needs to inspect the sensor, control or wiring, since measuring and tracing them is not homeowner work. Have the code and result of the reset ready. |
Where each code is listed
| Group | Codes | Page |
|---|---|---|
| Two-digit | F01, F02 | Wall oven page and range page |
| Hyphenated | F1-1, F1-2, F1-3, F1-H, F1-L, F3-1 | Range page |
| Short | F1, F2 | Range page and wall oven page |
The parts, in everyday terms
Background only, not source detail: the sensor is a probe that tells the control the oven temperature. The control reads this and switches the heating elements on and off. Wires link the two. The manufacturer never says which part is the culprit for any of the ten codes.
Power reset to try first
- Switch the range’s breaker off and keep it off a full minute.
- Switch it back on.
- Spend a minute checking whether the code shows again.
- Use the oven normally and confirm it works.
A code that returns
KitchenAid’s page ends there. A repeat code means the sensor, control or wiring has to be inspected by a technician, since measuring a sensor or following wiring is not work for a homeowner.
Other oven codes to compare
- F3E0: same three parts on the Ranges page; commercial-style pages give resets only.
- F3E2: adds a warming drawer sensor.
- F03 / F04: points to the electronic oven control.
Range repair across our metro areas
We take KitchenAid range calls for the Miami, New York, Houston, Los Angeles and San Diego metro areas on (844) 919-2035. Have the code, your range model and the result of the breaker reset ready.
Source: KitchenAid Product Help, Ranges: Error Codes; KitchenAid Product Help, Wall Oven: Error Code or Message
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.