F7E1 says the control shut down the heater after a water heating problem. An open heater, circuit or drive circuit is listed.
Model compatibility: KitchenAid reuses codes across series and model years, so F7E1 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
No heat entry: the control disabled the heater after a heating problem; open heater, heater circuit or drive circuit.
The heading in KitchenAid’s service documents for F7E1 is “heating, no heat.” Heating did not go as the control expected, so the control disabled the heater.
At a glance
| Code | F7E1 |
|---|---|
| What it means | No heat entry: the control disabled the heater after a heating problem; open heater, heater circuit or drive circuit. |
| What you can check | Owners have no fix here. Keep the lower panel and wiring untouched while the dishwasher is plugged in, and wait for service. |
| When to call a technician | Arrange a service visit, because an open heater, heater circuit or drive circuit needs a technician. Mention it if dishes come out wet or cold. |
Faults the documents list
- The heater is open.
- The heater circuit is open.
- The drive circuit that powers the heater has a fault.
In electrical language, open means a gap in the path of the current. KitchenAid does not rank the three.
F7E1 versus F7E2
| Code | Listing |
|---|---|
| F7E1 | No heat |
| F7E2 | Heater stuck on (a control drive circuit fault); owner help calls it “Wash Motor Error” |
If F7E1 is on your display, neither F7E2 meaning applies.
Precautions
Owners get no instructions from the source. Generally, a heating fault means holding off and waiting for service. Leave the lower panel and the wiring alone whenever the dishwasher is plugged in. If the cycle ends with wet or cold dishes, say so on the phone.
What stays unexplained
How the control judged heating to have failed, the length of its wait, and any temperature involved are all missing from both documents.
Related heating and temperature entries
- F7E2: heater stuck on and the owner-help wash motor entry
- F4E2: the owner-help “Heating System” listing
- F3E1: thermistor circuit entry
No-heat KitchenAid dishwasher repair near you
In the Miami, New York, Houston, Los Angeles and San Diego metro areas, call (844) 919-2035 about a KitchenAid dishwasher that shows F7E1. Keep the model number close at hand. Our dishwasher repair page adds detail.
Source: KitchenAid Tech Sheet W10750900 Rev C; KitchenAid Job Aid W10573282
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.