KitchenAid Dishwasher F9E1 Error Code
KitchenAid dishwasher owners see F9E1 when long drain / not draining is in play. Use this guide, then schedule independent diagnosis with Artisan Repair if it returns.
Independent-service wording for KitchenAid diagnostic displays; exact text varies by generation.
F9E1 on KitchenAid dishwasher appliances often means Long drain / not draining.
Model compatibility: KitchenAid reuses codes across series and model years, so F9E1 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Not draining in time — clean filter, check drain hose/disposer knockout, clear air gap. Control generations differ across KitchenAid lines — photograph the full code and rating label before ordering parts.
Symptoms you may notice
- The dishwasher stops mid-cycle and shows F9E1
- Water is left standing in the dishwasher
- Draining seems slow, noisy or incomplete
Possible causes
- A blocked or dirty filter (on models that have one)
- A kinked, clogged or poorly routed drain hose
- A restricted drain pump or drain path
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
- Check and clean the accessible filter if your model has one
- Check the visible drain hose for kinks or blockages
- Confirm the drain or standpipe access is clear
- Write down when F9E1 appeared and which cycle or mode was running
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
What not to attempt
- Do not open internal panels or access high-voltage components
- Do not bypass door locks, safety switches or interlocks
When to call a technician
Persistent F9E1 after one careful reset is a technician visit. Artisan Repair serves KitchenAid appliances as an independent repair shop.
Likely related component
drain pump or drain hose
Frequently asked questions
Not draining in time — clean filter, check drain hose/disposer knockout, clear air gap.
Clearing the display is not the same as fixing the cause. If F9E1 comes back, schedule diagnosis.
Not reliably. Two similar KitchenAid displays can map F9E1 differently by series.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.