KitchenAid words F56 and F60 identically: touchpad or its wiring. Reset at the breaker first.
Model compatibility: KitchenAid reuses codes across series and model years, so F56 / F60 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
KitchenAid says there may be a problem with the User Interface (Touchpad) or the associated wiring, for both codes.
Same explanation, two numbers
A single message accompanies both F56 and F60: the touchpad (User Interface) or the wiring attached to it may be faulty. For orientation only, and not article wording, the touchpad is where you touch to run the cooktop.
At a glance
| Code | F56 / F60 |
|---|---|
| What it means | A possible problem with the touchpad or its wiring; both codes carry the same advice. |
| What you can check | Switch power off at the breaker and wait sixty seconds, then switch it on. Watch for a minute to see whether either code returns, and confirm the cooktop runs. |
| When to call a technician | Nothing follows the reset for owners, so a returning code is a job for a technician. Say which code you saw, and keep objects and moisture off the surface until the visit. |
Fewer suspects than F40 and F47
Those codes also list the Cooktop Power Control Board. This pair drops it and mentions just the touchpad, along with the wiring that serves it. That accounts for the whole textual difference.
Steps from the articles
- Switch power off at the breaker and wait sixty seconds.
- Switch it on again.
- A minute of watching, to see whether F56 or F60 returns.
- A final check that the cooktop runs.
Questions
Should I clean the panel?
Neither article mentions cleaning. For a visibly dirty or wet panel, the wiping instruction sits in the articles for F2E1 and F1E0.
And if it returns?
Nothing follows the reset in the articles, which makes a returning code a job for a technician. Until the visit, avoid leaving objects or moisture on the surface, and consult the use and care guide for anything beyond that; these articles give no usage advice for the two codes.
Codes naming the touchpad
- FC E1: the cooktop’s touchpad unit or its wiring.
- F40: pairs the touchpad with the power control board.
Cooktop service in Miami, New York, Houston, Los Angeles and San Diego
Within those metro areas, ring (844) 919-2035 if F56 or F60 returns after the reset, and say which code you saw. The cooktop repair page has more.
Source: KitchenAid Product Help, Electric Cooktop: Error Code or Indicator Light
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.