F1E0 flags one or more touch keys as permanently pressed. Lights may flash and tones may sound. Clean the panel, reset power.
Model compatibility: KitchenAid reuses codes across series and model years, so F1E0 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
One or more keys are permanently pressed, and lights may flash and audio tones may sound.
At least one key on the touch panel is read as permanently pressed whenever F1E0 shows on a KitchenAid cooktop. While the code is active, the article warns, expect lights that flash and beeping or audio tones.
At a glance
| Code | F1E0 |
|---|---|
| What it means | One or more keys are permanently pressed, and lights may flash and audio tones may sound. |
| What you can check | Make sure every control is off, remove anything on the control area, then wipe and thoroughly clean the touch panel. If the code stays, switch the breaker off for one minute and back on. |
| When to call a technician | If F1E0 remains after cleaning and the reset, the Cooktop Control or its wiring may be at fault, so book service. Mention any beeping that starts as soon as power is restored. |
Steps in sequence
- Verify each control on the cooktop is OFF.
- Remove whatever is sitting on the control area.
- Clear debris from the control panel surface with a wipe.
- Thoroughly clean the touch control panel.
- Code still showing? Breaker off for one minute, then on.
- Stay with the cooktop for a minute to see if F1E0 comes back, and confirm it works.
Why a reset is second
Should cleaning leave the code in place, KitchenAid states that the Cooktop Control or its wiring may have a problem. Power is reset at that stage.
Two possible causes
The article names a permanently pressed key first and the Cooktop Control or wiring second. Whether cleaning and the reset work is the only guide to which applies.
Lights and tones
A panel that thinks a key is held down would explain the flashing and sounds. Beeping that starts as soon as the cooktop gets power, with nothing on it, is worth passing on in a service request.
Codes in the same area
- F2E1: keys blocked by food or water, where soap and water is the cleaning direction.
- F0 / E_03: an object or soil pressing against the panel.
- F1E7 / F1E9: Cooktop Control or wiring, no cleaning involved.
Cooktop repair in Miami, New York, Houston, Los Angeles and San Diego
Our number for KitchenAid cooktop repair in these metro areas is (844) 919-2035. Let us know that the panel is clean, the controls are off, the reset was done and F1E0 remains.
Source: KitchenAid Product Help, Electric Cooktop: Error Code or Indicator Light
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.