FC E1 on a KitchenAid cooktop refers to the touchpad or its wiring. Cut power at the breaker once, then get service if it persists.
Model compatibility: KitchenAid reuses codes across series and model years, so FCE1 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
KitchenAid lists a possible problem with the cooktop touchpad (user interface) or its associated wiring.
When a cooktop shows FC E1 (usually typed FCE1), KitchenAid starts with the finger-touch panel. The manufacturer’s text blames the touchpad, which it also calls the user interface, or the wiring connected to it.
At a glance
| Code | FCE1 |
|---|---|
| What it means | A possible problem with the touchpad or the wiring connected to it. |
| What you can check | Reset the power one time: turn off the breaker or breakers serving the cooktop, wait a full minute, and turn them on. Watch the display for another minute and confirm the cooktop operates. |
| When to call a technician | If FC E1 remains or comes back, book service. No cleaning or cookware step exists for this code. Share the code, the model number and the fact that the reset was done. |
What to do first
Reset the power one time. If the code remains or comes back after that, book service.
Power cycle
- Turn off the breaker or breakers that serve the cooktop.
- Let a full minute pass, then turn them on.
- Keep watching the display for another minute in case FC E1 reappears.
- Confirm the cooktop operates.
Touchpad, harness or supply?
Think of the touchpad as the flat control surface where a burner and heat are selected. KitchenAid ties FC E1 to that panel and the wiring serving it, which sets it apart from two near neighbours:
| Code | What the manufacturer names |
|---|---|
| FC E0 | Electrical supply and Induction Module |
| FC E1 | Control panel plus its wires |
| FC E4 | Harness running from that panel to the module |
Published pages mention a possible need for a qualified technician. Cleaning and cookware checks are absent for this code, so no other owner steps exist.
FAQ
Does the code mean the glass surface is faulty?
No. What the code names is the control area for entering commands, plus its wiring.
How long should I monitor after the breaker comes back on?
One minute, according to the manufacturer, to see that the code stays gone.
Cooktop repair across our metro areas
For a KitchenAid cooktop in the Miami, New York, Houston, Los Angeles or San Diego area, call (844) 919-2035 about a lasting FC E1. Share the code, the model number and the fact that the reset was done. See also cooktop repair.
Source: KitchenAid Product Help, Electric Cooktop Error Code or Indicator Light
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.