KitchenAid Dishwasher F9E2 Error Code
F9E2 is a KitchenAid dishwasher diagnostic usually grouped with drain. This page keeps DIY limits clear for metro homeowners.
Independent-service wording for KitchenAid diagnostic displays; exact text varies by generation.
KitchenAid dishwasher code F9E2: Drain — verify on your tech sheet.
Model compatibility: KitchenAid reuses codes across series and model years, so F9E2 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Drain monitoring / incomplete drain fault. Exact KitchenAid fault text shifts by model and control generation — always confirm against your use & care guide or tech sheet.
Symptoms you may notice
- The dishwasher stops mid-cycle and shows F9E2
- Water is left standing in the dishwasher
- Draining seems slow, noisy or incomplete
Possible causes
- A blocked or dirty filter (on models that have one)
- A kinked, clogged or poorly routed drain hose
- A restricted drain pump or drain path
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
- Check and clean the accessible filter if your model has one
- Check the visible drain hose for kinks or blockages
- Confirm the drain or standpipe access is clear
- Share freezer vs fridge temperatures, or wash/heat symptoms, when you book service
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
What not to attempt
- Do not open internal panels or access high-voltage components
- Do not bypass door locks, safety switches or interlocks
When to call a technician
If F9E2 persists after the safe checks above, book Artisan Repair for independent KitchenAid diagnosis with your model and serial numbers. Not an official KitchenAid service center.
Likely related component
drain pump or drain hose
Frequently asked questions
Drain monitoring / incomplete drain fault.
Try the safe list once. Persistent F9E2 on a KitchenAid appliance is a booking signal for Artisan Repair.
Use your model’s use & care guide first; general pages only approximate F9E2.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.