KitchenAid Dishwasher F8E2 Error Code
A KitchenAid dishwasher raising F8E2 deserves a calm read of flow clues — not a rush to open sealed or live panels.
Independent-service wording for KitchenAid diagnostic displays; exact text varies by generation.
F8E2 on KitchenAid dishwasher appliances often means Flow.
Model compatibility: KitchenAid reuses codes across series and model years, so F8E2 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Water-flow monitoring fault. Artisan Repair uses the code as a starting clue; final diagnosis still follows your appliance’s documentation.
Symptoms you may notice
- The dishwasher shows F8E2 and over- or under-fills
- The cycle stalls with F8E2 displayed
- Water levels seem wrong when F8E2 appears
Possible causes
- A pressure switch or level sensor
- A blocked pressure hose or chamber
- A control interpreting levels as a fault
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
- Check the accessible filter for blockages
- Confirm drainage access is clear
- Perform a manufacturer-approved restart
- Record the full KitchenAid model and serial numbers before contacting a technician
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
What not to attempt
- Do not open internal panels or access high-voltage components
- Do not bypass door locks, safety switches or interlocks
When to call a technician
Call Artisan Repair if F8E2 comes back, the appliance will not run safely, or you smell burning / see standing water near electrics.
Likely related component
pressure switch / level sensor
Frequently asked questions
Water-flow monitoring fault.
One breaker reset is reasonable. Recurring F8E2 means the fault is still present — do not keep resetting without checks.
Use your model’s use & care guide first; general pages only approximate F8E2.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.