KitchenAid Dishwasher F7E3 Error Code
F7E3 is a KitchenAid dishwasher diagnostic usually grouped with motor. This page keeps DIY limits clear for metro homeowners.
Reviewed for clarity on KitchenAid appliances; always match the code to your specific model.
Decode F7E3 for KitchenAid dishwasher owners: Motor.
Model compatibility: KitchenAid reuses codes across series and model years, so F7E3 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Circulation/wash motor fault. Exact KitchenAid fault text shifts by model and control generation — always confirm against your use & care guide or tech sheet.
Symptoms you may notice
- The dishwasher shows F7E3 and movement stalls or is noisy
- The drum or fan doesn’t turn as expected with F7E3
- The dishwasher interrupts its cycle when F7E3 appears
Possible causes
- An obstruction or imbalance affecting movement
- A motor, belt or bearing issue (varies by model)
- A control or sensor related to the motor
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
- Confirm the load is balanced and not jammed
- Check for visible obstructions around the drum or impeller
- Perform a manufacturer-approved restart
- Keep notes on any recent power outages, filter changes, or installs before the visit
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
What not to attempt
- Do not open internal panels or access high-voltage components
- Do not bypass door locks, safety switches or interlocks
When to call a technician
If F7E3 persists after the safe checks above, book Artisan Repair for independent KitchenAid diagnosis with your model and serial numbers. Not an official KitchenAid service center.
Likely related component
drive or circulation motor
Frequently asked questions
Circulation/wash motor fault.
Many KitchenAid codes drop after airflow, drain, or door issues are corrected. Returning F7E3 needs a tech.
No — KitchenAid control generations differ. Match F7E3 to your exact documentation.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.