KitchenAid Dishwasher F7E2 Error Code
KitchenAid dishwasher owners see F7E2 when wash motor is in play. Use this guide, then schedule independent diagnosis with Artisan Repair if it returns.
Plain-language KitchenAid summary for Artisan Repair visitors; confirm on your model’s documentation.
F7E2 · KitchenAid dishwasher · Wash motor (model-dependent).
Model compatibility: KitchenAid reuses codes across series and model years, so F7E2 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Wash motor error — reset once; recurring needs diagnosis. If your manual lists a different description for this code, trust the manual over any general summary.
Symptoms you may notice
- The dishwasher shows F7E2 and movement stalls or is noisy
- The drum or fan doesn’t turn as expected with F7E2
- The dishwasher interrupts its cycle when F7E2 appears
Possible causes
- An obstruction or imbalance affecting movement
- A motor, belt or bearing issue (varies by model)
- A control or sensor related to the motor
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
- Confirm the load is balanced and not jammed
- Check for visible obstructions around the drum or impeller
- Perform a manufacturer-approved restart
- Record the full KitchenAid model and serial numbers before contacting a technician
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
What not to attempt
- Do not open internal panels or access high-voltage components
- Do not bypass door locks, safety switches or interlocks
When to call a technician
Call Artisan Repair if F7E2 comes back, the appliance will not run safely, or you smell burning / see standing water near electrics.
Likely related component
drive or circulation motor
Frequently asked questions
Wash motor error — reset once; recurring needs diagnosis.
Often yes after fixing the underlying condition and power-cycling once. If F7E2 returns immediately, stop DIY and book independent service.
If your manual lists a different description for this code, trust the manual over any general summary.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.