KitchenAid Dishwasher F6E0 Error Code
Artisan Repair techs treat F6E0 on a KitchenAid dishwasher as a water fill starting point, then verify against your model sheet.
KitchenAid homeowner guide language only — not a factory service procedure.
F6E0 · KitchenAid dishwasher · Water fill (model-dependent).
Model compatibility: KitchenAid reuses codes across series and model years, so F6E0 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Fill/water-inlet related fault. Two KitchenAid units can share a display string yet mean different subsystems; verify the definition for your serial family.
Symptoms you may notice
- The dishwasher won’t fill or fills slowly and shows F6E0
- The cycle pauses early with F6E0 displayed
- You hear the dishwasher trying to draw water without success
Possible causes
- A partially closed or restricted water supply
- A kinked or blocked inlet hose
- An inlet valve or flow-sensing issue
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
- Confirm the water supply tap is fully open
- Check the inlet hose for kinks
- Perform a manufacturer-approved restart
- Photograph the display and rating label so an independent tech can match the code to your model
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
What not to attempt
- Do not open internal panels or access high-voltage components
- Do not bypass door locks, safety switches or interlocks
When to call a technician
For recurring F6E0, independent service is safer than guessing parts. Artisan Repair will diagnose on site and estimate before any repair.
Likely related component
water inlet valve or supply
Frequently asked questions
Fill/water-inlet related fault.
Safe homeowner resets may clear F6E0 temporarily; sealed, gas, and live-board work stay with a technician.
Platform families overlap, but Artisan Repair still confirms F6E0 against your serial family.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.