KitchenAid Dishwasher F3E0 Error Code
If your KitchenAid dishwasher shows F3E0, start with the safe checks here — the code often tracks thermistor / temperature before any parts talk.
Plain-language KitchenAid summary for Artisan Repair visitors; confirm on your model’s documentation.
Decode F3E0 for KitchenAid dishwasher owners: Thermistor / temperature.
Model compatibility: KitchenAid reuses codes across series and model years, so F3E0 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Temperature-sensing fault. Confirm nothing blocks wash arms; reset; service if it returns. Control generations differ across KitchenAid lines — photograph the full code and rating label before ordering parts.
Symptoms you may notice
- The dishwasher displays F3E0 and temperatures seem off
- F3E0 appears intermittently during operation
- The dishwasher behaves inconsistently with F3E0 shown
Possible causes
- A temperature sensor reading out of range
- A wiring or connection issue to the sensor
- A control interpreting the reading as a fault
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
- Confirm nothing is blocking internal vents or airflow
- Note the actual behavior or temperatures if measurable
- Perform a manufacturer-approved restart
- Share freezer vs fridge temperatures, or wash/heat symptoms, when you book service
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
What not to attempt
- Do not open internal panels or access high-voltage components
- Do not bypass door locks, safety switches or interlocks
When to call a technician
If F3E0 persists after the safe checks above, book Artisan Repair for independent KitchenAid diagnosis with your model and serial numbers. Not an official KitchenAid service center.
Likely related component
temperature sensor (NTC)
Frequently asked questions
Temperature-sensing fault. Confirm nothing blocks wash arms; reset; service if it returns.
Clearing the display is not the same as fixing the cause. If F3E0 comes back, schedule diagnosis.
Platform families overlap, but Artisan Repair still confirms F3E0 against your serial family.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.