KitchenAid Dishwasher 1C1C Error Code
1C1C on a KitchenAid dishwasher is commonly linked to kitchenaid fault. This page explains typical meaning, symptoms, safe checks, and when to call a technician.
Plain-language summary for KitchenAid / Whirlpool-family controls; confirm on model documentation.
1C1C — KitchenAid fault on a KitchenAid dishwasher (verify for your model).
Model compatibility: KitchenAid reuses codes across series and model years, so 1C1C may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
On KitchenAid appliances, 1C1C is a manufacturer diagnostic / fault code. Exact meaning varies by model series — confirm against your appliance documentation. Exact fault text varies by KitchenAid model and Whirlpool-family control generation. Always confirm against your model’s use & care guide or tech sheet.
Symptoms you may notice
- The dishwasher displays 1C1C during operation
- 1C1C appears without an obvious cause
- The dishwasher behaves inconsistently with 1C1C shown
Possible causes
- A sensor reading out of range
- A wiring or connection issue
- A control interpreting the reading as a fault
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
- Confirm the appliance has stable power
- Check for visible blockages or obstructions
- Record the full model number
- Record the full model and serial numbers before contacting a technician
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
What not to attempt
- Do not open internal panels or access high-voltage components
- Do not bypass door locks, safety switches or interlocks
When to call a technician
If 1C1C persists after the safe checks above, contact KitchenAid authorized service with your model and serial numbers.
Likely related component
a sensor
Frequently asked questions
On KitchenAid appliances, 1C1C is a manufacturer diagnostic / fault code. Exact meaning varies by model series — confirm against your appliance documentation.
Many codes clear after fixing the underlying condition and power-cycling once. If the code returns immediately, stop DIY checks and book service.
Exact fault text varies by KitchenAid model and Whirlpool-family control generation. Always confirm against your model’s use & care guide or tech sheet.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.